Rigol DSA1000A Series, Programming Manual

Page: 94 / 174

RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series 2-80
Syntax [:SENSe]:POWer[:RF]:ATTenuation <rel_ampl>
[:SENSe]:POWer[:RF]:ATTenuation?
Function Sets the attenuator of the front RF in dB, such as
:POW:ATT 20
The query returns “20”.
Explanations <rel_ampl> ranges from 0 dB to 50 dB.
Default 10 dB
Front Panel AMPT, Input Atten
32. [:SENSe]:POWer[:RF]:ATTenuation:AUTO
Syntax [:SENSe]:POWer[:RF]:ATTenuation:AUTO OFF|ON|0|1
[:SENSe]:POWer[:RF]:ATTenuation:AUTO?
Function Enables or disables the Auto function of the attenuator.
The query returns “0” or “1”.
Default ON|1
Front Panel AMPT, Input Atten, Auto/Manual
33. [:SENSe]:POWer[:RF]:GAIN[:STATe]
Syntax [:SENSe]:POWer[:RF]:GAIN[:STATe] OFF|ON|0|1
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Function Turns on or off the preamplifier.
The query returns “0” or “1”.
Default OFF|0
Front Panel AMPT, RF Preamp, On/Off
34. [:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer]
Syntax [:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer] <ampl>
[:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer]?
Function Sets the maximim power of the input mixer, the default unit is dBm,
such as
:POW:MIX:RANG -20
The query returns “-2.01”.
Explanations <ampl> ranges from -50 dBm to 0 dBm.
Default -10 dBm
Front Panel AMPT, MaxMixL
35. [:SENSe]:POWer:ASCale