Rigol DSA1000A Series, Programming Manual

Page: 97 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-83
Function Specifies the number of averages of the adjacent channel power
measurement results, such as
:ACP:AVER:COUN 100
The query returns “100”.
Explanations <integer> ranges from 1 to 1000.
Default 10
Front Panel Meas, ACP
Meas Setup, Avg Num
45. [:SENSe]:ACPower:AVERage[:STATe]
Syntax [:SENSe]:ACPower:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:ACPower:AVERage[:STATe]?
Function Turns on or off the Average function of the adjacent channel power
measurement.
The query returns “0” or “1”.
Default OFF|0
Front Panel Meas, ACP
Meas Setup, Avg Num, On/Off
46. [:SENSe]:ACPower:AVERage:TCONtrol
Syntax [:SENSe]:ACPower:AVERage:TCONtrol EXPonential|REPeat
[:SENSe]:ACPower:AVERage:TCONtrol?
Function Sets the average mode of the adjacent channel power measurement.
The query returns “EXP” or “REP”.
Explanations

In Exp mode, the result is from the exponent average calculation
of the current N (specified by
[:SENSe]:ACPower:AVERage:COUNt) measurements.

In REP mode, the result is the arithmetic average of the current N
(specified by [:SENSe]:ACPower:AVERage:COUNt)
measurements.
Default EXPonential
Front Panel Meas, ACP
Meas Setup, Avg Mode, Exp/Repeat
47. [:SENSe]:ACPower:BANDwidth:INTegration
Syntax [:SENSe]:ACPower:BANDwidth:INTegration <freq>
[:SENSe]:ACPower:BANDwidth:INTegration?