Rigol DSA1000A Series, Programming Manual

Page: 96 / 174

RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series 2-82
Front Panel Sweep, Numbers
40. [:SENSe]:SWEep:COUNt:CURRent?
Syntax [:SENSe]:SWEep:COUNt:CURRent?
Function The query returns the current number of sweeps in Single sweep
mode, such as 8.
41. [:SENSe]:SWEep:TIME
Syntax [:SENSe]:SWEep:TIME <time>
[:SENSe]:SWEep:TIME?
Function Sets the sweep time of the analyzer within specified span range, the
default unit is s, such as
:SWEep:TIME 0.1
The query returns “1.000000E-01”.
Explanations <time> ranges from 20 us to 3000 s.
Default 10 ms
Front Panel Sweep, Time
42. [:SENSe]:SWEep:TIME:AUTO
Syntax [:SENSe]:SWEep:TIME:AUTO OFF|ON|0|1
[:SENSe]:SWEep:TIME:AUTO?
Function Turns on or off the Auto function of the sweep time.
The query returns “0” or “1”.
Default ON|1
Front Panel Sweep, Time, Auto/Manual
43. [:SENSe]:SWEep:TIME:AUTO:RULes
Syntax :SENSe:SWEep:TIME:AUTO:RULes NORMal|ACCuracy
:SENSe:SWEep:TIME:AUTO:RULes?
Function Sets the auto mode of the sweep time.
The query returns “NORM” or “ACC”.
Default NORMal
Front Panel Sweep, Auto SWT
44. [:SENSe]:ACPower:AVERage:COUNt
Syntax [:SENSe]:ACPower:AVERage:COUNt <integer>
[:SENSe]:ACPower:AVERage:COUNt?