Ricoh SCRIPT2, Setup Manual

Page: 398 / 406

UNIX Configuration
10
1
Printing Method
Printing with lpr, lp
Depending on the type of the workstation being used, execute one of the follow-
ing commands:
❖ ❖ ❖ ❖
BSD UNIX workstation, Linux
% lpr -P printer_name file_name [ file_name... ]
For example:
printer name is np, file names are file1 and file2
% lpr -Pnp file1 file2
❖ ❖ ❖ ❖
Solaris, HP-UX
% lp -d printer_name file_name [ file_name... ]
For example:
printer name is np, file names are file1 and file2
% lp -d np file1 file2
Note
❒
” printer_name ” is the name that was entered when executing the installation
shell script.
❒
You can use wild cards ( * or ? ) for the file name.
❒
The message “print session full” appears when the maximum number of
print requests has been reached (max. 5 sessions). You should try to print
again when the number of requests becomes less than five. You can confirm
the number of print requests using telnet. For more information about using
telnet, see P.13
“Printer Status” .