Ricoh SCRIPT2 Setup Manual Download Page 256

Page: 256 / 406

Windows 2000 Configuration

Click the printer you want to use, and click

[

Next >

]

Note

❒

If the printer driver is not installed in the print server, a message appears.
If a driver has been installed on the client, click

[

]

, and follow the in-

structions on the screen.

❒

There is a Windows 2000 printer driver on the CD-ROM that comes with
this printer.

Select whether to use this printer as the default printer, and click

[

Next >

]

After installation is complete, click

[

Finish

]

The icon of the newly installed printer appears in the

[

Printers

]

window.

Summary of Contents for SCRIPT2




















































































































































































































































































































































































































Search results

Summary of Contents for SCRIPT2

Reviews:

Related manuals for SCRIPT2

Brands by name

Popular brands

Ricoh SCRIPT2, Setup Manual

Search results

Summary of Contents for SCRIPT2

Reviews:

Related manuals for SCRIPT2

Brands by name

Popular brands