Ricoh SCRIPT2, Setup Manual

Page: 141 / 406

Removing Misfed Paper
57
4
D
Push the pressure release levers
as illustrated to release the pres-
sure between the rollers.
E
Carefully pull the misfed paper
from the rear cover side.
F
Return the pressure release levers
to their original positions.
G
Close the top cover and rear cover,
and press the center of the top
cover until it locks securely into
place.
Note
❒
If the printer is equipped with
the paper feed unit (optional)
and the duplex unit (optional),
close the paper guide unit, cov-
er and upper portion of the du-
plex unit.
When the Message "Remove
Misfeed From Output Tray"
Appears
Important
❒
Toner printed on misfed paper is
not fused and can make your
hands or clothing dirty. Take care
to avoid contact with the toner as
you remove misfed paper.
A
Open the rear cover of the printer.
Note
❒
If the printer is equipped with
the paper feed unit (optional)
and the duplex unit (optional),
first open the cover of the du-
plex unit (a), then open the pa-
per guide unit inside the duplex
unit (b), and finally open the
rear cover of the printer (c).
ZDGY120J
ZDGY111J
(a)
(b)
(c)
ZDGY130J