Ricoh SCRIPT2, Setup Manual

Page: 217 / 406

iii
Introduction
This manual contains detailed instructions on configuring the printer as a net-
work printer. Read the section appropriate to your network environment for
how to configure the printer correctly.
Important
❒
The procedures written in this manual assume that you are a network admin-
istrator. If you are not, be sure to consult your network administrator before
configuration.
Reference
For more information about connecting the printer to the host computer with
Network Interface Board, see the Setup Guide that comes with this printer.
For more information about configuring the Network Interface Board with
the operation panel, see the Setup Guide that comes with this printer.
❖ ❖ ❖ ❖
Features
• Support for 100BASE-TX and 10BASE-T
• The Network Interface Board is compatible with NetWare (IPX/SPX),
Windows NT (TCP/IP, NetBEUI, IPP
*1
), Windows 2000 (TCP/IP, Net-
BEUI, IPP
*1
), Windows 95/98/Me (TCP/IP, NetBEUI, IPP
*1
), UNIX
(TCP/IP) and Macintosh (AppleTalk) protocols. This allows you to use the
printer in a network that uses different protocols and operating systems.
• A computer used as a dedicated print server is not required because the
Network Interface Board can be configured as a NetWare print server.
NetWare (Server)
Windows NT (Server)
Windows 2000,
UNIX
Windows 95/98/Me
Macintosh
NetWare
(Client)
Windows NT
Windows 2000