Ricoh SCRIPT2, Setup Manual

Page: 248 / 406

Windows 2000 Configuration
22
2
D
After a confirmation message appears, click [ Yes ] .
E
Confirm the [ Remove Shared File? ] dialog box.
F
When the uninstallation is complete, click [ OK ] .
Setting Up the Printer Driver
The following procedure allows you to configure the printer port to use Port-
Navi.
Preparation
The target printer must be turned on before starting the installation process.
A
Install the printer driver of the printer you want to use.
B
From the [ Printers ] window, click the icon of the printer. On the [ File ] menu,
click [ Properties ] .
C
Click the [ Ports ] tab and click [ Add Port ] .
D
Click [ PortNavi ] in the [ Available port types: ] box, and then click [ New Port ] .
The [ Select Printer ] dialog box appears and printers on the network are
browsed.
The displayed items are as follows:
Model Name: The model name of the printer.
Name: The name of Network Interface Board.
Comment: Additional information about Network Interface Board.
Address: The IP address of the printer.
E
Click the model name of the printer, and then click
[ OK ]
.
Note
❒
If you want to select any printer which is not shown here, click [ IP Address ]
and input the IP address of the printer.
F
Confirm that the PortNavi port name is shown in the
[ Print to the following
port(s) ] box, and click [ OK ] .
The PortNavi port name is shown as "IP address@model name".
The configuration is now complete.
When printing, select the configured printer here and print as usual. Printing
will be done automatically by PortNavi.