Ricoh SCRIPT2, Setup Manual

Page: 317 / 406

Understanding the Displayed Information
91
6
Understanding the Displayed Information
This section describes how to read status information returned by the Network
Interface Board.
Print Job Information
The status of the print job can be viewed using the following commands.
• telnet : Use the status command.
⇒
P.83 “Printer status”
Print Log Information
This is a record of the most recent ten jobs that have been printed.
This log can be displayed with the following commands.
• telnet : Use the prnlog command.
⇒
P.83 “Printer status”
Item name Meaning
ID Print request ID.
Source The name of the host requesting the print job.
Process The type of print command.
Status Status of print job.
• Active
Printing or preparing for printing.
• Waiting
Waiting to be transferred to the printer.
Time The time when the print request was received.
Item name Meaning
ID Print request ID.
Source The user name, workstation name or address of the host that sent
the print job.
Process The type of print command used.
Bytes The size of the file in bytes.
Result Communication result.
• OK
Indicates that the print job was completed correctly.
• NG
Indicates that the print job was not completed normally.
• Canceled
rcp, rsh or lpr print commands were stopped. A problem oc-
curred with the printing application. This message doesn't ap-
pear when ftp or RPRINTER is used.