Ricoh SCRIPT2, Setup Manual

Page: 284 / 406

NetWare Configuration
58
4
J
On the [ NIB ] menu, click [ Exit ] to exit the NIB Setup Tool.
K
Type “PCONSOLE” from the command prompt.
F:> PCONSOLE
L
Create a print queue as follows.
Note
❒
If you use a currently defined print queue, go to step
L
.
A
From the [ Available Options ] menu, select [ Print Queue Information ] and press
the
{{{{
ENTER
}}}}
key.
B
Press the
{{{{
INSERT
}}}}
key and type a print queue name.
C
Press the
{{{{
ESC
}}}}
key to return to the [ Available Options ] menu.
M
Create a printer as follows.
A
From the
[ Available Options ]
menu, select
[ Print Server Information ]
and press
the
{{{{
ENTER
}}}}
key.
B
To create a new print server, press the
{{{{
INSERT
}}}}
key and type a print
server name.
If you use an currently defined print server, select one of the print servers
shown in the
[ Print Server ] list.
Important
❒
Use the same name as that specified in the NIB Setup Tool. (Step
H
).
C
From the [ Print Server Information ] menu, select [ Print Server Configuration ] .
D
From the [ Print Server Configuration ] menu, select [ Printer Configuration ] .
E
Select the printer which is indicated as “Not Installed”.
Important
❒
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step
I
-
D
).
F
If you change the name of the printer, type a new name.
A name "Printer x" is assigned to the printer. x stands for the number of the
selected printer.
G
As type, select
[ Remote Parallel, LPT1 ]
.
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H
Press the
{{{{
ESC
}}}}
key, and click
[ Yes ]
in the confirmation dialog box.
I
Press the
{{{{
ESC
}}}}
key to return to [ Print Server Configuration Menu ] .