Ricoh SCRIPT2, Setup Manual

Page: 323 / 406

Message List
97
6
NetWare (When the Network Interface Board is started)
❖
❖ ❖
❖
When working as a print server
❖ ❖ ❖ ❖
When working as a remote printer
Access to NetWare server “file server name”
denied. Either there is no account for this
print server on the NetWare server or the
password was incorrect. Cannot log in to the file server. Confirm that
the print server is registered on the file serv-
er. If a password is specified for the print
server, delete it.
Attach to print queue “print queue name” Attached to the print queue.
Login to fileserver “file server name”
(“NDS|BINDERY”) Logged in to the file server with NDS or
BINDERY mode.
Open log file “file name” The specified log file has been opened.
Printer “printer name” has no queue The print queue is not assigned to the print-
er. Using NWAdmin, assign the print queue
to the printer, and then restart it.
Print queue “print queue name” cannot be
serviced by printer 0, “print server name” Print services are not available for the print
queue. Confirm that the volume of the print
queue exists on the specified file server.
The print server received error “error num-
ber” during attempt to log in to the net-
work.Access to the network was
denied.Verify that the print server name and
password are correct. Cannot log in to the file server. The print
server is not registered or the password is
specified. Register the print server without
specifying a password.
Cannot create service connection Cannot establish a connection with the file
server. Your request may exceed the maxi-
mum number of connections that the file
server can deal with at a time.
Cannot find rprinter (“print server name”/
”printer number”) The printer having the number displayed on
the print server does not exist. Confirm the
number of the printer registered to the print
server.
Establish a connection with the print server,
“print server name” A connection with the print server has been
established.
No local target for “print server name” Cannot get routing information about the file
server. If a different frame type is configured
from that used on the network, you should
select "Auto Select" as a frame type.
Required file server (“file server name”) not
found Cannot find the required file server.
Required print server (“print server name”)
not found Cannot find the print server. Confirm the
name of the print server.
Unable to attach to print server (“print server
name”) Cannot connect to the print server. The print
server refuses a connection for some reason.
Confirm the configuration of the print serv-
er.