Ricoh SCRIPT2, Setup Manual

Page: 280 / 406

NetWare Configuration
54
4
NetWare 3.x - Advanced Settings
The actual procedures for configuring the printer differ depending on whether
the Network Interface Board is configured as a print server or as a remote print-
er. This section describes how to configure it in the NetWare 3.x environment.
Preparation
The following procedures use the Property Sheet method in configuring the
Network Interface Board. If you configure the Network Interface Board as a
NetWare print server for the first time, we recommend you use the Wizard
method.
⇒
P.51 “Quick Setup Using the NIB Setup Tool Wizard”
Note
❒
This section assumes NetWare is functional and that the necessary environ-
ment for the NetWare Print Service is available.
Setting Up as a Print Server
A
Log on to the file server as a Supervisor or a Supervisor equivalent.
B
Run the NIB Setup Tool.
Reference
⇒
P.50 “Running the NIB Setup Tool”
C
Click [ Property Sheet ] and click [ OK ] .
The
[ Browse ]
dialog box of the Network Interface Board appears.
D
Click [ IPX protocol ] .
Install the NIB Setup Tool
Print Server Remote Printer
Basic Procedure
Configure the Network Interface Board
Configure the NetWare
Turn the power
off and on
Start the print server