Ricoh SCRIPT2, Setup Manual

Page: 190 / 406

Using the Operation Panel
106
5
E
Press
{{{{T T T T}}}}
or
{{{{U U U U}}}}
to select “On” or “Off”, and then press
{{{{
#Enter
}}}}
.
<Log Protect>
j
Off
l
This registers the setting and returns to the “Maintenance” menu.
F
Press
{{{{
On Line
}}}}
.
The "Ready" message appears on the panel display.
Deleting the User Code Record
This procedure describes how to clear the User Code record.
Note
❒
If “Log Protect" is set to "On", you can not delete the User Code record. Select
"Off" in “Log Protect", and then follow the procedure below.
⇒
P.105 “Protect-
ing the User Code Record”
A
Check if the On Line indicator stays on. If not, press
{{{{
On Line
}}}}
.
B
Press
{{{{
Menu
}}}}
.
The following message appears on the panel display.
<Menu>
j
IPDL-C Menu
l
C
Press
{{{{T T T T}}}}
or
{{{{U U U U}}}}
to display "Maintenance", and then press
{{{{
#Enter
}}}}
.
<Menu>
j
Maintenance
l
The following message appears on the panel display.
<Maintenance>
j
1.Toner Level
l
Power On Line Data In
Reset
Escape Menu
Media Enter
Error
ZDHS031E