Ricoh S-C4.5, Field Service Manual

Page: 219 / 436

2213* Outputs After NE
2213 1
[0 = 50 pages / 1 = 20 sheets]
Sets the number of copy/print/fax pages that can be made after toner near-end has been
detected. Reduce the number of pages if the user normally makes copies with a high image
ratio.
2214 Develpr Initialize
2214 1
Initializes the TD sensor toner supply target voltage and the TD sensor gain value. Execute
this SP replacing the developer or the TD sensor.
2221 ID Error Analysis ( "ID Sensor Error Analysis (SP2-221)")
2221 1 Vsg Displays the Vsg value.
2221 2 Vsp Displays the Vsp value.
2221 3 PWM Displays the PWM value.
2221 4 Vsdp Displays the Vsdp value.
2221 5 Vt Displays the Vt value.
2221 6 Vts Displays the Vts value.
2301* Tr Current Adj ( "Image Transfer Current").
2301 1
Normal paper
[–2 = –4 A / –1 = –2 A / 0 = 0 A / 1 = 2 A / 2
= +4 A]
Adjusts the current applied to the transfer roller when feeding from a paper tray. Use a
high setting if the user normally feeds relatively thick paper (within spec) from a paper tray
2301 2
Thick/Special
[–2 = –4 A / –1 = –2 A / 0 = 0 A / 1 = 2 A / 2
= +4 A]
Adjusts the current applied to the transfer roller when feeding from the by-pass tray. Use
a high setting (a) if the user normally feeds relatively thick paper from the by-pass tray, or
(b) if waste toner is re-attracted from the drum (which can occur when using transparencies).
System Service Mode
23
3