Ricoh S-C4.5, Field Service Manual

Page: 178 / 436

997 C
Application function selection error
The application selected by a key press
on the operation panel does not start or
ends abnormally.
• Software for that application is
defective
• An option required by the application
(RAM, DIMM, board) is not installed.
• Too complicated nest of the fax group
address
1. As for the fax operation problem,
simplify the nest of the fax group
address.
998 B
Application start error
After switching the machine on, the
application does not start within 60 s.
(No applications start or end normally.)
• Software for that application is
defective
• An option required by the application
(RAM, DIMM, board) is not installed.
1. Check the setting of SP5875-001. If
the setting is set to "1 (OFF)", change
it to "0 (OFF)".
6. Troubleshooting
176
6