Ricoh S-C4.5, Field Service Manual

Page: 222 / 436

2929 1 Upper [0.50 to 3.50 / 3.20 / 0.01V/step] DFU
2929 2 Lower [0.50 to 3.50 / 0.70 / 0.01V/step] DFU
2994* ID Detect Temp [30 to 90 / 30 / 1°C/step]
2994 1
Adjusts the temperature threshold. The ID sensor signal is not referenced when the fusing
temperature is at the specified level or higher while the copier is recovering or starting up.
2996* T Roller Cleaning [0 = No / 1 = Yes]
2996 1
Cleans or does not clean the transfer roller before each job. Select "1" if the backside of
the paper becomes unclean when output. Note that the copier takes a longer time to output
the first copy when you select "1". If you select "0", the transfer roller is never cleaned.
2998* Main Mag- print [–0.5 to +0.5 / 0.0 / 0.1%/step]
2998 1
Adjusts the magnification ( "Adjusting Copy Image Area" in the section "Replacement
and Adjustment"). The specification is 100 ±1.0%.
SP4-XXX (Scanner)
4008* SubScan Mag (Scanner) [-0.9 to +0.9 / 0.0 / 0.1%/step]
4008 1
Adjusts the sub-scan magnification ( "Adjusting Copy Image Area" in the section
"Replacement and Adjustment").
4009* Main Scan Mag (Scanner) [–0.9 to +0.9 / 0.0 / 0.1%/step]
4009 1
Adjusts the main-scan magnification ( "Adjusting Copy Image Area" in the section
"Replacement and Adjustment").
4010* LE Scan Regist [–5.0 to +5.0 / 0.0 / 0.1 mm/step]
4010 1
Adjusts the leading edge registration ( "Adjusting Copy Image Area" in the section
"Replacement and Adjustment").
4011* S-to-S Scanner Registration [–2.0 to +2.0 / 0.0 / 0.1 mm/step]
3. Appendix: SP Mode Tables
26
3