Ricoh S-C4.5, Field Service Manual

Page: 285 / 436

007 NIB Summary
021 Copier UP
022 Scanner SP
023 Scanner UP
5998 Engine Memory Clear
001 See the section "Memory Clear" in this chapter.
SP6-XXX (Peripherals)
6006*
ADF Adjustment ( "DF Image Adjustment" in the "Adjusting Copy Image Area")
NOTE: Available menus depend on the machine model and its configuration.
001
StoS/Front Regist [–5.0 to +5.0 / 0.0 / 0.1 mm/step]
Adjusts the side-to-side registration for the front side of the original, for ARDF mode. Use
the
key to select "+" or "–" before entering the value
002
Leading Regist [–5.0 to +5.0 / 0.0 / 0.1 mm/step]
Adjusts the leading edge registration for ARDF mode. Use the key to select "+" or
"–" before entering the value.
003
Trailing Erase [–3.0 to +3.0 / –1.5 / 0.1 mm/step]
Adjusts the trailing edge erase margin for ARDF mode. Use the key to select "+" or
"–" before entering the value.
004
S to S/ Rear Regist [–5.0 to +5.0 / 0.0 / 0.1 mm/step]
Adjusts the side-to-side registration for the 2nd side of the original, for ARDF mode. Use
the
key to select "+" or "–" before entering the value
005
Sub-scan Magnif [–0.9 to +0.9 / 0.0 / 0.1 %/step]
Adjusts the sub-scan magnification for the ARDF.
006
Origin Curl Adj [0 = No / 1 = Yes]
Turns on or off the skew correction at 2nd side scanning. This SP is activated only when the
duplex mode is selected.
System Service Mode
89
3