BIT SWITCHES
14 June, 2002
5-34
System Switch 11
No FUNCTION
COMMENTS
0
TTI printing position
0:
Superimposed on the page
data
1:
Printed before the data
leading edge
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
1
CIL printing position
0:
Printed before the data
leading edge
1:
Superimposed on the page
data
Change this bit to 1 if the CIL overprints
information that the customer considers to be
important (G4 transmissions).
2
Position of label insertion
0:
Left
1:
Right
3
Not used
Do not change these settings.
4
Rx time printing position
0:
Superimposed on the end of
page data
1:
Printed after the data trailing
edge
Change this bit to 1 to avoid image loss.
5
Quick/Speed Dial listing method
0: Name 1: Fax number
Determines which will appear on the journal for
each Quick/Speed Dial, the registered name or
registered fax number.
6
Memory reception if no RTI or
CSI received
0:
Reception disabled
1:
Reception enabled only when
there is no problem with the
printer mechanism
This switch setting depends on user parameter
switch 05 bit 1.
This Sw U.P.05 bit 1
-- 0 :
Reception
always
enabled
0 1 :
Reception
disabled
1 1 :
Reception
enabled
only
if
there
is no problem with the printer
mechanism
7
Use of parallel memory
transmission with G4
transmission
0:
Disabled
1:
Enabled
This bit determines whether parallel transmission
can be used with G4 transmissions.
System Switch 12
No FUNCTION
COMMENTS
0
to
7
TTI printing position in the main
scan direction
08 to 92 (BCD) mm. Only input even numbers.
This setting determines the TTI print start position
from the left edge of the paper. If the TTI is too far
to the right, the file number, which is on the top
right of the page, may obscure it.
