14 June, 2002
INSTALLING OPTIONAL UNITS
1-11
Ins
ta
lla
tion
7. Attach the bracket [I] to the connector [J] on the
harness [D] from the unit kit. Then, attach them to
bracket [K] as shown.
8. Clamp the harness [D] from Step 7 as
shown, then attach the bracket assembly [L]
to the machine (1 screw).
9. Reattach the rear and upper covers.
14. Plug in the machine and turn on the main power switch.
15. Enter Service mode and set bit 2 of communication switch 16 to “1”.
16. Exit Service mode and turn off the machine, then turn the machine back on.
17. Print the System Parameter List from inside Service mode, and make sure that
“G4” is listed as an option. Then exit Service mode.
10. Set up and program the items required for ISDN communications:
To connect to the US National ISDN network, it is necessary to also input the
SPID (Service Profile ID Number).
H208I021.WMF
H208I022.WMF
[D]
[I]
[J]
[D]
[K]
[L]
