14 June, 2002
BIT SWITCHES
5-35
Service
Tables
System Switch 13
No FUNCTION
COMMENTS
0-1
Remaining memory threshold
for activating the Tx/Rx File
Save feature
Bit 1 Bit 0
Threshold
0
0 25%
0
1 50%
(default)
1
0 75%
1
1 Not
used
If the remaining space in the 40MB memory is
below the threshold value, the Tx/Rx File Save
feature cannot be used. Adjust the threshold value
to meet the customer's requirements.
2
Not used
Do not change this setting.
3-4
Files that can be stored in the
Tx/Rx File Save feature
Bit 1 Bit 0
Files
0 0
All
files
0 1
Received
files
only
1 0
Transmitted
files
only
1 1
Not
used
The default setting is (0 0).
Change the settings to limit the file types that can
be stored using the Tx/Rx File Save feature.
5-7
Not used
Do not change this setting.
System Switch 14
No FUNCTION
COMMENTS
0
to
7
Wait time between pages in
printer mode (with an optional
printer interface unit)
05 to 64 (H) (5 to 100s)
During a printer job, a fax message could come in
while a page from the computer is still being
compiled.
If the timer has not run out yet, the machine will
continue to compile the page from the printer and
the fax message will not be printed. However, if
the timer runs out before the page has been
compiled, all pages of the fax message will be
printed, then the rest of the waiting print job will be
output.
Therefore, with a longer setting, the fax machine is
more likely to wait until the end of print job output
before printing any incoming fax message. A
shorter setting allows the fax machine to interrupt
a print job to print an incoming fax message.
Default setting: 0A(H) = 10 s
