BIT SWITCHES
14 June, 2002
5-46
Communication Switch 07
No FUNCTION
COMMENTS
0
Fallback from G4 to G3 if the
other terminal is not a G4
terminal
0:
Disabled
1:
Enabled
Also see System Switch 0A bit 7.
Refer to the ISDN G4 option service manual (G4
Internal Switches 17, 18, 1A, 1B, and 1C) for the
CPS code set (Cause Value set) to determine G4
to G3 fallback.
1-2
Not used
Do not change the setting.
3
Fallback from G4 to G3
reflected in programmed
Quick/Speed dials
0:
Fallback enabled (Default)
1:
Always start with G4
0:
If a communication falls back from G4 to G3, the
machine will always start with G3 from the next
transmission to this number.
1:
The machine will always start to transmit with
G4.
4
Fallback from G4 to G3 when
G4 communication fails on the
ISDN B-channel
0:
Fallback disabled (Default)
1:
Fallback enabled
1:
Enable this switch only when G4 communication
errors occur because the exchanger connects G4
calls to the PSTN.
This problem only occurs with some types of
exchanger.
5
Not used
Do not change the setting.
6
ISDN connection internal or
external line
0:
External Line
1:
Internal Line
Set to 1 if there is a PABX between the machine
and the ISDN.
7
Not used
Do not change the setting.
Communication Switch 07
No FUNCTION
COMMENTS
0
to
7
ISDN prefix number
F0 to 99 (BCD)
FF means not used.
This bit effective when bit 6 of Communication
switch 07 is 1
Communication Switch 09
- Not used (do not change any of these settings)
Communication Switch 0A
No FUNCTION
COMMENTS
0
Memory transmission
resumption point for redialing
0:
From the error page
1:
From page 1
0:
The transmission begins from the page where
transmission failed the previous time.
1:
Transmission begins from the first page.
1-7
Not used
Do not change these settings.
