Ricoh M281 Series, Service Manual

Page: 879 / 1003

Fax Connection Unit Error Codes
SM 45 D255/D256 FAX OPTION
D255/
D256
F
A
X
OP
TI
ON
3.2 FAX CONNECTION UNIT ERROR CODES
3.2.1 FAX CONNECTION UNIT ERROR CODE LIST
MACHINE_ERR_01
Error
Code
Possible Causes Troubleshooting Procedures
01(1) IPv4/IPv6 not enabled Enable IPv4 and IPv6
01(3) "Cancel" is pressed by user. -
01(4) A false connection ID is being used.
Check that the network is
established.
01(5)
Network is disconnected because of no
response within a specified time.
01(14)

Either this machine or the machine
at the other party has entered SP
mode or Initial settings.

An established connection exists.

Exit SP mode or initial settings.

Wait until the connection has
finished.
MACHINE_ERR_02
Error
Code
Possible Causes Troubleshooting Procedures
02(5)

Wrong IP address/host name was
used.

The main power of the other
machine at destination is OFF.

LAN cable is disconnected.

Network is rebooting.

Enter the correct IP
address/host name

Turn ON the main power.

Connect the LAN cable

Wait until rebooting has
finished.