Ricoh M281 Series Service Manual Download Page 411

Page: 411 / 1003

NVRAM Data Upload/Download

5-41

D255/D256/M281/M282

yst

int

8. In order to prevent an error during the download, be sure to mark the SD card that

holds the uploaded data with the number of the machine from which the data was

uploaded.



You can upload NVRAM data from more than one machine to the same SD card.

5.6.2 DOWNLOADING AN SD CARD TO NVRAM

Do the following procedure to download SP data from an SD card to the NVRAM in the machine.



The NVRAM data download may fail if the SD card with the NVRAM data is damaged, or if

the connection between the controller and BiCU is defective.



Do the download procedure again if the download fails.



Do the following procedure if the second attempt fails:



Enter the NVRAM data manually using the SMC print you created before uploading the

NVRAM data.

1. Turn OFF the main power.

2. Remove the controller cover. (MP 501/601: page 4-45, SP 5300/5310: page 4-67)

3. Insert the SD card into SD Card Slot 2 (lower) [A].

MP 501/601

SP 5300/5310

4. Turn ON the main power.

5. Press [Execute] with SP5-825-001 (NVRAM Data Download).

Summary of Contents for M281 Series












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands

Ricoh M281 Series, Service Manual

Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands