Ricoh M281 Series, Service Manual

Page: 424 / 1003

UP/SP Data Import/Export
D255/D256/M281/M282 5-54 SM
Result Code Cause Solutions
8 (DISK FULL) The available storage space on
the external medium is
insufficient.
Execute the operation again after
making sure there is enough
storage space.
9 (DEVICE ERROR) Failed to write or read the log
file.
Check whether the path to the
folder for storing the file or the folder
in which the file is stored is missing.
10 (LOG ERROR) The hard disk is faulty. Contact your supervisor.
20 (PART FAILED) Failed to import some settings. The reason for the failure is logged
in "NgCode". Check the code.
Reason for the Error (Ng-Name)
2. INVALID VALUE
The specified value exceeds the
allowable range.
3. PERMISSION ERROR
The permission to edit the setting is
missing.
4. NOT EXIST
The setting does not exist in the
system.
5. INTERLOCK ERROR
The setting cannot be changed
because of the system status or
interlocking with other specified
settings.
6. OTHER ERROR
The setting cannot be changed for
some other reason.
21 (INVALID FILE) Failed to import the file because
it is in the wrong format in the
external medium.
Check whether the file format is
correct.
The import file should be a CSV file.
22 (INVALID KEY) The encryption key is not valid. Use the correct encryption key.

When exporting device information from the control panel, the data can be saved only on
an SD card.

The file format for exports is CSV.