Ricoh M281 Series, Service Manual

Page: 858 / 1003

Error Codes
D255/D256 FAX OPTION 24 SM
Code Meaning Suggested Cause/Action
0-07
No post-message response
from the other party after a
page was sent

Check the connection.

Replace the FCU.

The other party is out of paper or has a
paper jam.

The other party may have disconnected
the call.

Check for a bad line.

The other machine may be defective. Try
sending to another machine.
0-08
The other party sent RTN or
PIN after receiving a page,
because there were too many
errors

Check the connection.

Replace the FCU.

The other party may have a paper jam, or
run out of paper or memory space.

Try adjusting the TX level and/or cable
equalizer settings.

The other party may have a defective
modem/FCU; try sending to another
machine.

Check for line problems and noise.
Reference:

TX level: NCU Parameter 01 (PSTN)

Cable equalizer: G3 Switch 07 (PSTN)

Dedicated TX parameters in Service
Program Mode
0-14
Non-standard post message
response code received

Incompatible or defective remote terminal;
try sending to another machine.

Noisy line; resend.

Try adjusting the TX level and/or cable
equalizer settings.

Replace the FCU.
Reference:
See error code 0-08.