Ricoh M281 Series, Service Manual

Page: 835 / 1003

Fax Connection Unit Type M24 (D3CP-05, 06, 07)
SM 1 D255/D256 FAX OPTION
D255/
D256
F
A
X
OP
TI
ON
1. INSTALLATION
1.1 FAX CONNECTION UNIT TYPE M24 (D3CP-05, 06, 07)
1.1.1 ACCESSORY CHECK
No. Description Q'ty
1 Fax Connection Unit SD card 1
- EMC address decal (EU only) 1
- RoHS sheet (AP/CHN only) 1
- RoHS decal (AP/CHN only) 1
1.1.2 INSTALLATION PROCEDURE
This unit allows a machine without the fax unit installed (client machine) to send and receive faxes
via a machine with the fax unit installed (remote machine).
Requirements:

Up to six machines can be registered as the client machines.

Machines that have the fax unit installed cannot be used as the client machine.

Only one machine can be registered as the Remote Machine.

Firmware for this unit: "aics" (software number: D3CP5759)

Remote Fax transmissions are possible on a G3 line.

The remote fax function does not support User Code Authentication. Disable the User Code
Authentication on the remote machine.

Use this function to check the contents of a file that is stored in memory and not yet sent. Also,
use this function to cancel a transmission from the client machine.
Order of installation:
1. Install the Fax Connection Unit in the remote machine (fax unit is already installed).