Ricoh M281 Series Service Manual Download Page 814

Page: 814 / 1003

Printing Features

D255/D256/M281/M282

4-6

SM Appendix

purpose of BitSw 9-0.

BitSw 9-0=0 (default):

The printer system will not wait 10 seconds for the first 2KB of data to arrive.

BitSw 9-0=1:

The printer system will wait up to 10 seconds for the first 2KB of data to arrive.

4.1.3 PRINT IMAGES ROTATION

Printer Bit Switch description

Bit Switch 5-6

This change the way an MFP/LP rotates PCL, PS, PDF, or RPCS print images.

BitSW 5-6=0 (default):

A uniform binding edge (short or long edge) will be applied to every page of every job. Pages will

always be rotated as if they were to be bound on that edge.

BitSW 5-6=1:

A uniform binding edge (short or long edge) will only be applied if the job is stapled, punched, or

Z-folded. Otherwise, the bound edge might differ from page to page.

Example:

A 3-page job. Page 1 has the PCL simplex command. Page 2 and 3 have the PCL duplex

long-edge bind commands.

No finishing options (staple, punch, z-fold) are used.

Bit Switch #5-6=0:

Bit Switch #5-6=1:

Summary of Contents for M281 Series












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands

Ricoh M281 Series, Service Manual

Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands