Ricoh M281 Series, Service Manual

Page: 418 / 1003

UP/SP Data Import/Export
D255/D256/M281/M282 5-48 SM
6. Select [Device Setting Information] -> Press [OK]
7. Select [DevSettgInfo: Exp (MemDev)] -> Press [OK]
8. Select [Device Unique Information] -> Press [OK]
9. Select [Include] or [Exclude] -> Press [OK]
If [Include] is selected, the device unique information (IP address, host name, fax number,
etc) is included in the importing device information.
10. Select [Enter Encryption Key] -> Press [OK]
11. Select [Yes] -> Press [OK]
12. Select [Enter] -> Enter an encryption key. -> Select [Accept]
13. Select [Enter] -> Re-enter the encryption key. -> Select [Accept]
14. Select [Export] -> [Export]
15. When the confirmation screen appears, select [Yes].
16. Make sure the message regarding that the exporting process being successfully
completed appears. -> Select [Exit]
17. Log out.

If import or export fails, you can check the log for the error. The log is stored in the same
location as the exported device setting information file.
5.7.4 SP DATA IMPORT/EXPORT (MP 501/601)
Data that can be imported and exported

System SP

Printer SP

Fax SP

Scanner SP
Exporting Device Information
When exporting SP device information from the control panel, the data is saved on an SD card.
1. Insert an SD card into the media slot on the side of the operation panel.
2. Enter SP mode.
3. Press SP5-749-001 (Import/Export: Export)
4. Select "Target" SP settings (System/Printer/Fax/Scanner/Smart Operation Panel) to be
exported.
5. Select "Option" settings (Unique/Secret).