Ricoh M281 Series Service Manual Download Page 414

Page: 414 / 1003

UP/SP Data Import/Export

D255/D256/M281/M282

5-44



@Remote-related data



Counters



Settings that can only be specified via Web Image Monitor or Web Service (for example,

Bonjour, SSDP setting)

Exporting Device Information

This can be exported / imported by an administrator with all privileges.

When exporting SP device information from the control panel, the data is saved on an SD card.

1. Insert an SD card into the media slot on the side of the operation panel.

2. Log in from the operation panel as an administrator with all privileges.

3. Press [System Settings].

4. Press [Administrator Tools].

5. Press [Next] three times.

6. Press [Device Setting Information: Export (Memry Strge Devc)].

7. Set the export conditions.



Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device

Unique Information" includes the IP address, host name, fax number, etc.



Specify an encryption key.

Summary of Contents for M281 Series












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands

Ricoh M281 Series, Service Manual

Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands