Ricoh M281 Series Service Manual Download Page 156

Page: 156 / 1003

OCR Unit Type M13 (D3AC-23, 24, 25) (MP 501/601 Only)

D255/D256/M281/M282

2-128

2.18.3 RECOVERY PROCEDURE

When this option is installed, a function is saved on the HDD, and ID information on the SD card is

saved in the NVRAM. Therefore, when replacing the HDD and/or NVRAM, this option must be

reinstalled.

When storing the original SD card



When only the HDD is replaced

Reinstall using the original SD card.



When only the NVRAM is replaced

When uploading or downloading the NVRAM data, reinstall using the original SD card.

When not uploading or downloading the NVRAM data, order and reinstall a new SD card

(service part).



When the HDD and NVRAM are replaced simultaneously

Reinstall using the original SD card.

If the original SD card is lost

Order and reinstall a new SD card (service part).



Perform reinstallation in the same way as installation.

Summary of Contents for M281 Series












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands

Ricoh M281 Series, Service Manual

Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands