Ricoh M281 Series Service Manual Download Page 426

Page: 426 / 1003

Address Book Upload/Download

D255/D256/M281/M282

5-56

5.8.2 DOWNLOAD

1. Prepare a formatted SD card.

2. Make sure that the write-protection on the SD card is off.

3. Turn OFF the main power.

4. Remove the controller cover. (MP 501/601: page 4-45, SP 5300/5310: page 4-67)

5. Insert the SD card into SD Card Slot 2 (lower) [A].

MP 501/601

SP 5300/5310

6. Turn ON the main power.

7. Enter the SP mode.

8. Execute SP5-846-051 (Backup All Addr Book).

9. Exit the SP mode, and then turn OFF the main power.

10. Remove the SD card form the SD Card Slot 2 (lower).

11. Reassemble the machine.



If the capacity of SD card is not enough to store the local user information, an error

message is displayed.



Carefully handle the SD card, which contains user information. Do not take it back to your

location.

Summary of Contents for M281 Series












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands

Ricoh M281 Series, Service Manual

Search results

Summary of Contents for M281 Series

Reviews:

Related manuals for M281 Series

Brands by name

Popular brands