Ricoh M281 Series, Service Manual

Page: 144 / 1003

USB Device Server Option Type M19 (D3BC-28, 29)
D255/D256/M281/M282 2-116 SM
IP Address Setting
This section describes how to set an IP address on this option manually. You can set an IP
address which is not only on the same network segment but also on a different network segment
to share a single machine with devices in multiple networks.

You cannot change the IP address from the operation panel of the main machine. The
setting must be done from a web browser on your PC.

The network setting of this option is initially assigned as follows: IP address:
192.168.100.100 / Subnet mask: 255.255.255.0

The network setting of your PC must be in the same network segment in order to change
the network setting of this option.
1. Make a note of the current network settings of your PC.
2. Change the IP address on your PC to [192.168.100.xxx (*0 - 255)].
3. Change the subnet mask on your PC to [255.255.255.0].
4. Open a web browser.
5. Type [http://192.168.100.100/] in the address bar.
6. Press the "Enter" key.

The setting screen for this option appears.
7. Click [Network Setting].