3.Appendices: SP Mode Tables
126
Jobs
These SPs reveal the number of times an application is used, not the number of pages processed.
When an application is opened for image input or output, this counts as one job.
Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
Only jobs executed by the customer are counted. Jobs executed by the customer engineer using the SP modes are
not counted.
When using secure printing (when a password is required to start the print job), the job is counted at the time when
either "Delete Data" or "Specify Output" is specified.
A job is counted as a fax job when the job is stored for sending.
When a fax is received to fax memory, the F: counter increments but the L: counter does not (the document server is
not used).
A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast are not counted
separately).
A fax broadcast is counted only after all the faxes have been sent to their destinations. If one transmission
generates an error, then the broadcast will not be counted until the transmission has been completed.
A printed fax report counts as one job for the F: counter.
The F: counter does not distinguish between fax sending or receiving.
When a copy job on the document server is printed, SP8022 also increments, and when a print job stored on the
document server is printed, SP8024 also increments.
When an original is both copied and stored on the document server, the C: and L: counters both increment.
When a print job is stored on the document server, only the L: counter increments.
When the user presses the Document Server button to store the job on the document server, only the L: counter
increments.
When the user enters document server mode and prints data stored on the document server, only the L: counter
increments.
When an image received from Palm 2 is received and stored, the L: counter increments.
When the customer prints a report (user code list, for example), the O: counter increments. However, for fax
reports and reports executed from the fax application, the F: counter increments.
8011 T:Jobs/LS
*CTL These SPs count the number of jobs stored to the document server by each application,
to reveal how local storage is being used for input.
[0 to 99999999/ 0 / 1/step]
The L: counter counts the number of jobs stored from within the document server mode
screen at the operation panel.
8012 C:Jobs/LS *CTL
8013 F:Jobs/LS *CTL
8014 P:Jobs/LS *CTL
8015 S:Jobs/LS *CTL
8016 L:Jobs/LS
*CTL
8017 O:Jobs/LS *CTL
When a scan job is sent to the document server, the S: counter increments. When you enter document server mode
and then scan an original, the L: counter increments.
When a print job is sent to the document server, the P: counter increments.
When a network application sends data to the document server, the O: counter increments.
Summary of Contents for M0A0
