Ricoh LD055 Page 436 Operating Instructions Manual Download

Page: 436 / 468

Troubleshooting

Machine Does not Print

Possible Cause

Solutions

Is the power on?

Turn on the machine.

Is the interface cable properly connected?

Connect the interface cable properly.

If there are any connectors or screws, make
sure that they are fastened securely.

Are you using the correct interface cable?

Be sure to use the correct cable. If the cable is
damaged or worn, replace it with a new one.

Did you connect the interface cable after turn-
ing on the main switch?

Be sure to connect the interface cable before
turning on the main switch.

Is the machine Online?

Bring it Online by pressing

[

Online

]

Is the specified paper set?

Set the specified paper in any of the input
trays.

Are there any error messages on the display
panel?

Check the error message, and take the re-
quired action.

Does the Function Status indicator on the left
side of the Printer key stay red?

Check the error message, and take the re-
quired action.

Is the Data In Indicator blinking or lit?

If it is not, the data does not reach the machine.
Check the printer cable connection.

Also confirm that the printer port settings are
correct.

Can you print a configuration page?

If you cannot, check the printer cable connec-
tion.

Also confirm that the printer port settings are
correct.

Can you make a “Print Test Page” from the
printer driver?

If you cannot, the machine might be out of or-
der. Contact your sales or service representa-
tive.

Summary of Contents for LD055





















































































































































































































































































































































































































































































Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands

Ricoh LD055, Operating Instructions Manual

Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands