Ricoh LD055, Operating Instructions Manual

Page: 394 / 468

Installing the Printer Driver and Software
18
3
Quick Install
Auto Run starts the installer automatically when you load the CD-ROM in the
CD-ROM drive. By selecting Quick Install, you can install the necessary software
easily.
TCP/IP requires the following:
• This machine must be connected to the network through the network inter-
face cable.
• This machine must be turned on.
• The TCP/IP protocol must be configured.
• An IP address must be allocated to this machine and to the computer.
Limitation
❒
If your system is Windows 2000/XP or Windows NT 4.0, installing a printer
driver by Auto Run requires Administrators permission. When you install a
printer driver by Auto Run, log on using an account that has Administrators
permission.
Note
❒
Auto Run might not automatically work with certain OS settings. In this case,
launch “Setup.exe” located on the CD-ROM root directory.
If you want to cancel Auto Run, hold down the
{{{{
Shift
}}}}
key (when your system is
Windows 2000, hold down the left
{{{{
Shift
}}}}
key) while inserting the CD-ROM.
Keep the
{{{{
Shift
}}}}
key held down until the computer has finished accessing the
CD-ROM.
AAAA
Close all applications that are running.
BBBB
Insert the CD-ROM into the CD-ROM drive.
Auto Run will start the installer.
CCCC
Select a language to change the interface language, and then click [ OK ] .
The following languages are available: Cestina (Czech), Dansk (Danish),
Deutsh (German), English (English), Espanol (Spanish), Francais (French),
Italiano (Italian), Magyar (Hungarian), Nederlands (Dutch), Norsk (Norwe-
gian), Polski (Polish), Portugues (Portuguese), Suomi (Finnish), Svenska
(Swedish)
Default interface language is English.
DDDD
Select [ Quick Install ] .
EEEE
The software license agreement appears in the [ License Agreement ] dialog
box.
After reading through all of the contents, click [ I accept the agreement. ] to agree
with the License Agreement, and then click [ Next ] .