Ricoh LD055 Page 30 Operating Instructions Manual Download

Page: 30 / 468

Basics

Starting the Machine

AAAA

Press the operation switch to make the On indicator go on.

The display panel will come on.

Note

❒

If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.

❒

During the warm-up period (less than 330 seconds), you can use the Auto
Start function. See

⇒

p.88 “Auto Start”.

❒

You can set up a copy job and press the

{{{{

Start

}}}}

key while the “Select modes

and press the start key. Scanning originals can be started.” message is dis-
played.

❒

When “Input user code, then press # .” is displayed, enter your user code.
See

⇒

p.87 “User Codes”.

Shutting Down the Machine

AAAA

Press the operation switch to make the On indicator go off.

Turning Off the Main Power

AAAA

Turn off the main power switch.

The

main power

indicator of the control panel goes off.

TSPS010N

Sample Copy

Interrupt

top

Start

Main Power

Summary of Contents for LD055





















































































































































































































































































































































































































































































Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands

Ricoh LD055, Operating Instructions Manual

Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands