Ricoh LD055 Page 386 Operating Instructions Manual Download

Page: 386 / 468

Getting Started

Guide to This Machine

Control Panel

This display panel is for the installed Copier and Printer.

Shows errors and machine status.

: Data In indicator

The Data In indicator shows the status of
data reception from a computer.

• This indicator blinks when data is be-

ing received.

• This indicator goes on when there is

data remaining to be printed.

: Service call indicator

: Misfeed indicator

: Cover indicator

: Staple indicator

: Toner indicator

{{{{

User Tools/Counter

}}}}

key

• User Tools

Press to change the default settings
and conditions to meet your require-
ments.

• Counter

Press to check or print the total num-
ber of copies made.

Display panel

Shows operation status, error messages,
and function menus.

{{{{

Clear Modes/Energy Saver

}}}}

key

• Clear Modes

Press to clear any previously entered
copy job settings.

• Energy Saver

Press to switch to and from Energy
Saver mode.

Operation switch

Press this switch to turn the power on
(the

indicator goes on). To turn the

power off, press this switch again (the

indicator goes off).

Function Status indicators

These show the status of the functions below:

• Green: the function is active.
• Red: the function has been interrupt-

ed.

Function keys

Press the appropriate key to choose any
of the following functions:

• Copy
• Document Server New Job
• Job List
• Printer

ZBQS040N

Screen

Contrast

User Tools/

Counter

Sample Copy

Interrupt

Program

Clear Modes/

Energy Saver

Clear/Stop

Start

Enter

Main Power

Copy

New Job

Document Server

New Job

Job List

Printer

Summary of Contents for LD055





















































































































































































































































































































































































































































































Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands

Ricoh LD055, Operating Instructions Manual

Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands