Ricoh LD055 Page 357 Operating Instructions Manual Download

Page: 357 / 468

Accessing the User Tools (System Settings)

DDDD

Change the settings by following the instructions on the display panel.
Then press the

[

]

key.

Note

❒

[

]

: Press to set the new settings and return to the previous menu.

❒

[

Cancel

]

: Press to return to the previous menu without changing any data.

Exiting from the User Tools

AAAA

After changing the User Tools settings, press the

[

Exit

]

key on the User

Tools Main Menu.

Changing the User Tools is completed, and the machine is ready for copying.

Note

❒

To exit from the change of the machine's default settings and return to
Copy mode, press the

{{{{

User Tools/Counter

}}}}

key.

❒

You can also exit from the User Tools by pressing the

{{{{

User Tools/Counter

}}}}

key.

MojitoC2b_GBsys_F_FM.book Page 9 Wednesday, July 31, 2002 2:16 PM

Summary of Contents for LD055





















































































































































































































































































































































































































































































Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands

Ricoh LD055, Operating Instructions Manual

Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands