Ricoh LD055, Operating Instructions Manual, Page: 259 / 468

If Your Machine Does Not Operate as You Want
251
5
Connect Copy
Machine Status Problem/Cause Action
You cannot use Connect
Copy.
You cannot use Connect
Copy. The other machine is in
use.
The sub-unit has a paper mis-
feed or needs a fresh supply of
toner or other replenishable
supply. Press the [ Cancel ] key on the
master unit and follow the in-
structions given on the sub-
unit display.
Reference
See
⇒
p.268 “
D
Changing
the Toner Bottle”.
See
⇒
p.270 “
x
Clearing
Misfeeds”.
See
⇒
p.283 “
e
Removing
Jammed Staples”.
If the sub-unit display shows
that a cover is open, follow the
instructions given. For all oth-
er situations, follow the in-
structions on the display.
The User Tools menu is open
on the sub-unit. Press the [ Cancel ] key on the
master unit. Then on the sub-
unit press the
{{{{
User
Tools/Counter
}}}}
key to close the
User Tools menu.
The sub-unit is busy copying
or printing with another func-
tion. Press the
[ Cancel ]
key on the
master unit then stop the sub-
unit from copying/printing.
The sub-unit is in Interrupt
mode. Press the [ Cancel ] key on the
master unit. Then press the
{{{{
Interrupt
}}}}
key on the sub-unit
to exit Interrupt mode.
Reference
⇒
p.86 “Interrupt Copy”
The sub-unit has been
switched off automatically by
the Weekly Timer function
and is waiting for the Key Op-
erator Off Code to be entered. Press the [ Cancel ] key on the
master unit. Then on the sub-
unit enter the code and press
the
[ # ]
key.
Reference
See “Key Operator Code
for Off Setting” in the Sys-
tem Settings manual.
The sub-unit is not in Copy
mode (i.e., in Document Serv-
er mode). Press the [ Cancel ] key on the
master unit. Then press the
{{{{
Copy/New Job
}}}}
key on the
sub-unit to switch over to
Copy mode.