Ricoh LD055, Operating Instructions Manual, Page: 97 / 468

Other Functions
89
2
Sample Copy
Use this function to check copy settings before making a long copy run.
Limitation
❒
This function can be used only when the Sort function has been turned on.
Note
❒
This function is only available on the master unit in Connect Copy mode.
AAAA
Select Sort and any other functions, then enter the number of copy sets to
be made.
BBBB
Set the originals.
CCCC
Press the
{{{{
Sample Copy
}}}}
key.
One copy set is delivered for proof copying.
DDDD
After checking the results, press the [ Resume ] key if the sample is accept-
able.
The number of copies made is the number you specified minus one for the
proof copy.
Note
❒
If you press the
[ Cancel ]
key after checking the results, return to step
A
to
adjust the copy settings as necessary. You can change the settings for Sta-
ple, Punch, Duplex, Copy Orientation, Stamp, Margin Adjust, and Cov-
er/Slip Sheet. However, depending on the combinations of functions,
some settings might not be changed.