Ricoh LD055, Operating Instructions Manual, Page: 81 / 468

Copying from the Bypass Tray
73
2
F
Press the [ OK ] key.
DDDD
Set your originals, then press the
{{{{
Start
}}}}
key.
EEEE
When your copy job is finished, press the
{{{{
Clear Modes/Energy Saver
}}}}
key to
clear the settings.
When Copying onto OHP Transparencies or Thick Paper
To make copies onto OHP transparencies or thick paper, you need to specify the
paper type.
Limitation
❒
When you select “OHP” or “Thick Paper”, copy paper is delivered face up
even if you have set the “Face-Up/Down Selection in Bypass Mode” setting
to “Face Down Exit”. See “Face-Up/Down Selection in Bypass Mode” in
⇒
p.311 “Count Manager”.
Note
❒
Select
[ Thick Paper ]
if the paper weight is more than 105 g/m
2
, 28 lb. Bond.
AAAA
Open the bypass tray, and adjust the guides to the paper size.
Important
❒
If the guides are not flush with the copy paper, a skew image or paper mis-
feeds might occur.
BBBB
Lightly insert the OHP transparencies or thick paper face up until the beep-
er sounds.
The
k
k k
k
indicator on the display automatically goes on.
Note
❒
When you set an OHP transparency, make sure that its front and back faces
are properly positioned.
❒
To avoid paper misfeeds, fan the paper before setting it in the tray.
CCCC
Press the
{{{{
#
}}}}
key.
DDDD
Select [ OHP ] or [ Thick Paper ] .