Ricoh LD055 Page 79 Operating Instructions Manual Download

Page: 79 / 468

Copying from the Bypass Tray

AAAA

Open the bypass tray.

BBBB

Adjust the guides to copy paper size.

Important

❒

If the guides are not flush with the copy paper, a skew image or paper mis-
feeds might occur.

CCCC

Lightly insert the copy paper face up until the beeper sounds.

The

indicator on the display automatically goes on.

Extender

Note

❒

The face side of the paper set is copied on.

❒

Do not stack paper over the limit mark, otherwise a skew image or paper
misfeeds might occur.

❒

If the beeper is turned off, lightly insert the copy paper until it stops. See
“Operation Panel Beeper” in the System Settings manual.

❒

When the document feeder is open, set the direction of the copy paper to

❒

Swing out the extender to support paper sizes larger than A4

, 8

11"

❒

Fan paper to get air between the sheets and avoid a multi-sheet feed.

❒

Before setting, adjust the paper if curled or warped.

ZBQH050E

ZBQH040E

Summary of Contents for LD055





















































































































































































































































































































































































































































































Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands

Ricoh LD055, Operating Instructions Manual

Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands