manualshive.com logo in svg

Ricoh LD055, Operating Instructions Manual, Page: 60 / 468

Share
Download
Ricoh LD055 Operating Instructions Manual Download Page 60

Copying

52

2

Check the position of the index tab to avoid cropping the image. See “Tray 2:
Special Paper Indication” in the System Settings manual.

Limitation

❒

Use originals which contain only text.

❒

The image area of one original should be 6% or less of the whole area of the
original.

❒

The font size of the letters on the originals should be 16 points or less.

❒

When using the tab stock, the temperature should be 20ºC, 68ºF or more.

Important

❒

Tab stock is always fed starting with the top tab.

1.

Set originals

2.

Place the tab stocks in Tray 2

3.

Make copies

1

2

3

Summary of Contents for LD055





















































































































































































































































































































































































































































































Reviews:

No comments