manualshive.com logo in svg

Ricoh LD055, Operating Instructions Manual, Page: 398 / 468

Share
Download
Ricoh LD055 Operating Instructions Manual Download Page 398

Installing the Printer Driver and Software

22

3

Installing the PostScript 3 Printer Driver

This section describes basic instructions for installing the PostScript 3 printer
driver. Actual procedures may vary depending on the operating system. Follow
the appropriate procedures below.

Reference

To use the PostScript 3 printer driver, the optional PostScript 3 Kit must be
installed on the machine. See the “PostScript 3 Kit Type 700 Operating In-
structions Supplement” manual for details.

Important

❒

When updating the printer driver by installing the latest version, you should
uninstall any earlier versions. See “Uninstalling the Printer Driver” in the
“Printer Reference 2” manual.

Windows 95/98/Me - Installing the PostScript 3 Printer Driver

Installing the printer driver

AAAA

Close all applications that are running.

BBBB

Insert the CD-ROM into the CD-ROM drive.

Auto Run will start the installer.

CCCC

Select a language for the interface language, and then click 

[

OK

]

.

The following languages are available: Cestina (Czech), Dansk (Danish),
Deutsch (German), English (English), Espanol (Spanish), Francais (French),
Italiano (Italian), Magyar (Hungarian), Nederlands (Dutch), Norsk (Norwe-
gian), Polski (Polish), Portugues (Portuguese), Suomi (Finnish), Svenska
(Swedish) 
Default interface language is English.

Note

❒

The printer driver with the selected language will be installed.

❒

The printer driver will be installed in English if you select the following
languages: Cestina, Magyar, Polski, Portugues and Suomi.

DDDD

Select 

[

PostScript 3 Printer Driver

]

.

[

Add Printer Wizard

]

 starts.

EEEE

Click 

[

Next

]

.

Summary of Contents for LD055





















































































































































































































































































































































































































































































Reviews:

No comments