manualshive.com logo in svg

Ricoh LD055, Operating Instructions Manual, Page: 268 / 468

Share
Download
Ricoh LD055 Operating Instructions Manual Download Page 268

Troubleshooting

260

5

Adjust Image

Combine

Problem

Cause

Action

In Double Copies mode, parts 
of the original image are not 
copied.

Combination of original and 
copy paper is not correct.

Select the proper original and 
copy paper. See 

⇒

 p.166 

“Double Copies”.

In Border, Center, or Cen-
ter/Border mode, parts of the 
original image are not copied.

You set the wide erased mar-
gin.

Set the narrow margin with 
the User Tools. See “Erase 
Border” and “Erase Center” in 

⇒

 p.299 “Page Format 

1

/

2

”.

Your original has narrow mar-
gins on four sides.

In Margin Adjustment mode, 
parts of the original image are 
not copied.

You set the wide erased mar-
gin.

Set the narrow margin with 
the User Tools. See “Front 
Margin: Left/Right” and 
“Back Margin: Left/Right” in 

⇒

 p.299 “Page Format 

1

/

2

”.

In Image Repeat mode, the 
original image is not copied 
repeatedly.

You selected the same size 
copy paper as originals, and 
did not select the proper re-
production ratio.

Select copy paper larger than 
the originals.

Select the proper reproduc-
tion ratio.

Problem

Cause

Action

You cannot make a book from 
a booklet or magazine by fold-
ing copies.

Combine Original Booklet 
Format or Combine Original 
Magazine Format is not cor-
rect.

Change the setting. See 

⇒

 

p.115 “Combine”.

Parts of the image are not cop-
ied.

You specified an improper re-
production ratio that does not 
meet the sizes of your origi-
nals and copy paper.

When you specify a reproduc-
tion ratio using Manual Paper 
Select mode, make sure that 
the ratio matches your origi-
nals and the copy paper.

Note

❒

Select the correct repro-
duction ratio before using 
Combine mode.

Your originals are not identi-
cal in size and direction.

Use originals that are identical 
in size and direction.

Order of copies is not correct.

You set originals in the incor-
rect order.

When setting a stack of origi-
nals in the document feeder, 
the last page should be on the 
bottom.

If you set an original on the ex-
posure glass, start with the 
first page to be copied.

Summary of Contents for LD055





















































































































































































































































































































































































































































































Reviews:

No comments