manualshive.com logo in svg

Ricoh LD055, Operating Instructions Manual, Page: 276 / 468

Share
Download
Ricoh LD055 Operating Instructions Manual Download Page 276

Troubleshooting

268

5

D

D

D

D

 Changing the Toner Bottle

When 

D

 is displayed, it is time to supply toner.

R

 

WARNING:

R

 

CAUTION:

R

 

CAUTION:

Important

❒

If you use toner other than that recommended, a fault might occur.

❒

When adding toner, do not turn off the operation switch. If you do, your set-
tings are cleared.

❒

Always add toner after the machine instructs you to add toner.

❒

Do not use used toner. This will damage the machine.

Note

❒

You can still make about 1,000 copies after 

D

 appears, but replace the toner

early to prevent poor copy quality.

Reference

Regarding toner storage, see 

⇒

 p.30 “Toner Storage”.

•

Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame. Dispose of used toner containers 
in accordance with local regulations.

•

Keep toner (used or unused) and toner containers out of reach of children.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies avail-
able at an authorized dealer.

• 1: Open the front cover of the machine.

• 2: Pull out the lever under the toner bottle 

toward you 90

°

.

• 3: Pull the green lever, and gently pull out 

the toner bottle.

ZBQT010E

1

2

ZBQT020E

Summary of Contents for LD055





















































































































































































































































































































































































































































































Reviews:

No comments