manualshive.com logo in svg

Ricoh LD055, Operating Instructions Manual, Page: 324 / 468

Share
Download
Ricoh LD055 Operating Instructions Manual Download Page 324

REMARKS

316

7

• Make sure that the plug is firmly inserted in the outlet.
• Voltage must not fluctuate more than 10%.
• The wall outlet shall be installed near the machine and shall be easily accessi-

ble.

Access to the Machine

Place the machine near the power source, providing clearance as shown.

1.

Rear: more than 3 cm (1.2")

2.

Right: more than 4 cm (1.6")

3.

Front: more than 70 cm (27.6")

4.

Left: more than 10 cm (4.0")

Note

❒

For the required space when options are installed, contact your service repre-
sentative.

3

4

1

2

TSPS060E

Summary of Contents for LD055





















































































































































































































































































































































































































































































Reviews:

No comments