Ricoh LD055 Page 246 Operating Instructions Manual Download

Page: 246 / 468

Connect Copy (Option)

238

Exiting Connect Copy Mode

This procedure describes how to exit Connect Copy mode and return to the stan-
dard copying functions.

AAAA

Press the

[

Connect

]

key on the master unit.

The

[

Connect

]

key will be deselected.

Note

❒

Settings that were selected on the master unit while in Connect Copy mode
will not be cleared.

❒

If you press the

{{{{

Clear Modes/Energy Saver

}}}}

key on the master unit, Connect

Copy mode is canceled and the master unit returns to the initial condition
of the Copy mode.

❒

The sub-unit will return to the state it was in prior to entering Connect
Copy mode.

Reference

If you cannot exit Connect Copy mode by pressing the

[

Connect

]

key, see

⇒

p.256 “If You Cannot Exit Connect Copy”.

Summary of Contents for LD055





















































































































































































































































































































































































































































































Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands

Ricoh LD055, Operating Instructions Manual

Search results

Summary of Contents for LD055

Reviews:

Related manuals for LD055

Brands by name

Popular brands