Ricoh Lanier AP206, Setup Manual

Page: 66 / 406

Installing the Printer Driver and Software
54
4
E
Double-click the [ ColorSync™ Profiles ] folder in the CD-ROM.
F
Copy all four files in the
[ ColorSync™ Profiles ]
folder.
The ColorSync profiles are installed.
Setting up the PPD file
Preparation
Confirm that the printer is connected to an AppleTalk network before per-
forming the following procedure.
A
On the Apple menu, select [ Chooser ] .
B
Click the [ LaserWriter 8 ] icon.
C
In the [ Select a PostScript Printer ] list, click the name of the printer you want
to use, and then click [ Create ] .
Note
❒
If your network has multiple zones, click the name of the zone the printer
belongs to in the
[ AppleTalk Zones ] list in the lower left side of the [ Chooser ]
dialog box.
D
Click the name of the printer, and then click [ Select ] .
Note
❒
Be sure to select the PPD file correctly. If the correct PPD file is not selected,
certain options may not be available.
The PPD file is set up and the LaserWriter 8 icon appears at the left of the
printer name in the list. Next, follow the procedure on P.54
“Setting up op-
tions” to make the option settings, or to close the [ Chooser ] dialog box.
Setting up options
A
On the Apple menu, select [ Chooser ] .
B
Click the [ LaserWriter 8 ] icon.
C
In the
[ Select a PostScript Printer ]
list, click the name of the printer you want
to use, and then click [ Setup ] .
Note
❒
If your network has multiple zones, click the name of the zone the printer
belongs to in the
[ AppleTalk Zones ] list in the lower left side of the [ Chooser ]
dialog box.
D
Click
[ Configure ]
.
A list of options appears.