Ricoh Lanier AP206, Setup Manual

Page: 350 / 406

Using RICOH-SCRIPT2 with Windows
6
1
• Statistics Code
Use this to set [ On ] or [ Off ] .
If
[ On ]
is selected, User Code “99999999” and User ID “RPS2” will be fixed.
If
[ Off ]
is selected, User Code “Other” and User ID “?” will be fixed.
Reference
For more information about User Codes, see the “Printer Reference” in-
cluded as a PDF file on the CD-ROM.
❖ ❖ ❖ ❖
Installable options
This box shows the options installed in the printer.
When selecting an option inside the upper list of this group, its current setting
appears in the
[ Change setting for: ] box. The following settings are available:
For the optional tray unit: [ None ] , [ Tray 2 ] .
For the duplex unit:
[ Not Installed ]
,
[ Installed ]
.
For the optional memory unit (VMOption):
[ 32 MB RAM ]
,
[ 64 MB RAM ]
,
[ 96 MB
RAM ] , [ 128 MB RAM ] , [ 160 MB RAM ] , [ 192 MB RAM ] , [ 256 MB RAM ] .
[ PostScript ] tab
Use this tab to set the output format of the PostScript files and the data process-
ing method.
On the
[ PostScript ] tab, click [ Advanced ] to display the [ Advanced PostScript Op-
tions ]
dialog box.
❖ ❖ ❖ ❖
When the printer is connected to the network.
Clear both [ Send CTRL+D before job ] and [ Send CTRL+D after job ] .
❖
❖ ❖
❖
When the printer is connected to the computer via a parallel cable.
Select both [ Send CTRL+D before job ] and [ Send CTRL+D after job ] . Also, confirm
that [ ASCII data ] is selected. If it is not selected, select it.
Reference
For more information about the network, see P.20 “Windows Network Environ-
ment” .
For more information about the PostScript headers, see P.21 “Windows Head-
ers” .